3 Things To Know About T-3
Agribusiness No Comments »It is important to choose a voice t1 or T3 service that would suit your type of business so you ought to be sure to make right choices. In order to help you with your decision, here are three things you need to understand about T3 voice service.
What is a T3?
The T3 system is a large sized digital circuit with high-speed connectivity that is capable of trnsmitting data with a speed of 43.232 Mbps (megabits per second). This system is equal to 28 T1 units, wherein each unit has 24 channels. The T3, therefore, is equivalent to having 672 regular telephone lines. The T3 is appropriate for large applications such as large businesses and campus environments like hospitals and universities.
The connections used for the T-3 Service, which is basically a group of dedicated T1 circuits, run on fiber not copper cables. T3s are engineered specifically for your site so these are thoroughly tested before installation. Smart jacks are used for installing the T3s in your room. The circuits can be fitted directly into your telephone system or through a CSU (customer service unit). The CSU is used as a test point and a loopback point that can be helpful if circuit problems arise.
How does a T3 work?
The T3 is capable of handling 672 simultaneous voice connections that could be a combination of both incoming and outgoing calls. With the T3 you can connect your main business telephone number to it so that you can accept an almost unlimited amount of incoming calls especially with the front-end voice mail or auto-attendant product. The T3 can also support DID or the direct inward dial that allows you to assign a number that can be dialed from the outside. These DID numbers are just like private lines, wherein the outside caller can directly contact a number in your office.
The T3 system also saves on space in the telephone room because each T1 circuit uses two pairs of wires. The T3 circuit is also very reliable, one factor that makes this possible is that the system is constantly monitored by the telephone company. If there is a failure it can often be resolved remotely. Since the T3 system is composed of a network of T1 circuits, once a problem occurs with the voice traffic this can easily be resolved by re-routing this over other circuits.
Can we save money with a T3?
You can save money with the T3 even if the expense at installation is expensive. Using this system would be cheaper than keeping a chunk of copper trunks. But in order to keep track of your savings you have to monitor how much you use in a day. The cost of T1s and T3s have significantly decreased in recent years. Aside from the one-time installation fee, which is expensive, you also have to check the monthly charges and the service coverage. Make sure that the plan you choose would cover the hours you are open for business.
All this considered, you should begin to see a significant savings during the first year with even more substantial savings as time goes on. Not only does the T3 provide high quality reliable voice service it helps to present a professional appearance for your company. The T3 is a serious commitment yet if your needs warrant it this is definitely the way to go.